ARES Corporation uses multiple contract vehicles to meet client needs and requirements. If you need further assistance, please contact us at Contracts@arescorporation.com.

Industry Categorization

The following identifies the North American Industry Classifications System (NAICS) cross-referenced to the Standard Industrial Code (SIC) that are applicable to ARES.

GSA Schedule No. GS-23F-0113L

ARES offers the full range of Professional Engineering Services providing integrated engineering and design solutions needed by government agencies to provide best project solutions that quantify and minimize risks while improving performance in a cost-effective manner and supporting client goals.

The following services, as represented by the Special Item Numbers, span the full engineering life cycle:

• 871-1 Strategic Planning for Technology Programs/Activity
• 871-2 Concepts Development and Requirements Analysis
• 871-3 Systems Design, Engineering and Integration
• 871-4 Test and Evaluation
• 871-5 Integrated Logistics Support
• 871-6 Acquisition and Life Cycle Management
• Disciplines: Electrical, Chemical, Civil, and Mechanical

These Professional Engineering Services noted by the six Special Item Numbers (SINs) are detailed below and arranged to follow the specific developmental phases of any project.

SIN 871-1 STRATEGIC PLANNING FOR TECHNOLOGY PROGRAMS/ACTIVITIES

Services required under this SIN involve the definition and interpretation of high-level organizational engineering performance requirements such as projects, systems, missions, etc., and the objectives and approaches to their achievement.  Typical associated tasks include, but are not limited to, an analysis of mission, program goals and objectives, requirements analysis, organizational performance assessment, special studies and analysis, training, privatization and outsourcing.

SIN 871-2 CONCEPT DEVELOPMENT AND REQUIREMENTS ANALYSIS

Services required under this SIN involve abstract or concept studies and analysis, requirements definition, preliminary planning, and the evaluation of alternative technical approaches and associated costs for the development or enhancement of high level general performance specifications of a system, project, mission, or activity. Typical associated tasks include, but are not limited to requirements analysis, cost/cost-performance trade-off analysis, feasibility analysis, regulatory compliance support, technology conceptual designs, training, privatization, and outsourcing.

SIN 871-3 SYSTEM DESIGN, ENGINEERING AND INTEGRATION

Services required under this SIN involve the translation of a system (or subsystem, program, project, activity) concept into a preliminary and detailed design (engineering plans and specifications), performing risk identification/analysis/mitigation, traceability, and then integrating the various components to produce a working prototype or model of the system.  Typical associated tasks include, but are not limited to, computer-aided design, design studies and analysis, high level detailed specification preparation, configuration management and document control, fabrication, assembly and simulation, modeling, training, privatization, and outsourcing.

SIN 871-4 TEST AND EVALUATION

Services required under this SIN involve the application of various techniques demonstrating that a prototype system (subsystem, program, project or activity) performs in accordance with the objectives outlined in the original design.  Typical associated tasks include, but are not limited to, testing of a prototype and first article(s) testing, environmental testing, independent verification and validation, reverse engineering, simulation and modeling (to test the feasibility of a concept), system safety, quality assurance, physical testing of the product or system, training, privatization, and outsourcing.

SIN 871-5 INTEGRATED LOGISTICS SUPPORT

Services required under this SIN involve the analysis, planning, and detailed design of all engineering-specific logistics support including material goods, personnel, and operational maintenance and repair of systems throughout their life cycles.  Typical associated tasks include, but are not limited to, ergonomic/human performance analysis, feasibility analysis, logistics planning, requirements determination, policy standards/procedures development, long-term reliability and maintainability, training, privatization, and outsourcing.

SIN 871-6 ACQUISITION AND LIFE CYCLE MANAGEMENT

Services required under this SIN involve the entire planning, budgetary, contract, and systems/program management execution functions required to procure and/or produce, render operational, and provide life cycle support (maintenance, repair, supplies, engineering-specific logistics) to technology-based systems, activities, subsystems, projects, etc. Typical associated tasks include, but are not limited to, operation and maintenance, program/project management (including, but not limited to, construction management) technology transfer/insertion, training, privatization, and outsourcing.

NAVY, SEAPORT-E CONTRACT

Contract Number: N00178-12-D-6711
Period of Performance: From July 2012 valid through April 2019
Most Recent SeaPort-e Task Order: N000178-12-D-6771

ARES SeaPort-e TEAM:

SeaPort-e Services Experience:

Duke Meekins
Contract Manager
703.714.9960
contracts@arescorporation.com

Quality Assurance Program:

ARES provides world-class professional support services and takes pride in promoting and maintaining a corporate culture of integrity, quality, innovation, and commitment. We are ISO9001/AS9100 certified. The ARES Quality Assurance Program is an integral part of our corporate management system that ensures activities are planned, documented, and verified with the objective of providing error-free products to our customers on time and within planned budgets.

The ARES Quality Assurance Program is based on compliance with 10 CFR 50, Appendix B, “Quality Assurance”; 10 CFR 830, Subpart A, “Quality Assurance Requirements”; and DOE O 414.1D, Quality Assurance. ARES Holding Corporation has selected ASME NQA-1, Quality Assurance Program Requirements for Nuclear Facilities Applications as the applicable standard for providing interpretive guidance for development and implementation of this Program. In addition, the program fulfills the requirements of ANSI/ISO/ASQ Q9001-2008, Quality Management Systems – Requirements. The Quality Assurance Program provides 19 elements and methodology that implement programmatic requirements.

Other Important Information:

Point(s) of production:
Various locations within the US including:
Huntsville, AL; Burlingame, CA; Oakland, CA; Torrance, CA; Walnut Creek, CA; Littleton, CO; Colorado Springs, CO; Cleveland, OH; Stratham, NH; Los Alamos, NM; Albuquerque, NM; Houston, TX; Vienna, VA; Richland, WA

Discount from list prices:
Net Price

Quantity discounts:
1% volume discount for orders awarded over $1M

Prompt payment terms:
Net 30 Days

Foreign Items:
None

Expedited Delivery:
As Negotiated

Urgent Requirements:
As Negotiated

DUNS number:
80-772-1980

ARES is currently registered in the Central Contractor Registration (CCR) system.